...
Beschreibung der Eigenschaften
Name | Description | Example |
---|---|---|
connectivityType | Defines the type of connectivity | FTTH, FTTB, FTTC, HFC, Coax, TAL, OAL |
accessType | Defines the type and technology of the access | FTTH-Ethernet, FTTH-P2P, FTTH-GPON, FTTH-XGS-PON, FTTB-VDSL, FTTB-GFAST-CuDa., FTTB-GFAST-Coax, FTTB-DOCSIS, FTTB-Ethernet, FTTC-VDSL, FTTC-ADSL, FTTC-SDSL, HFC-DOCSIS |
accessBandwidth | Defines the upstream and downstream access bandwidth | 400 / 100 MBit/s |
trafficHandover | Defines how the traffic is handed over to the reseller | L2, L3, LT |
trafficAggregation | defines |
how the traffic is aggregated for handover | ??? (TBD → bitte prüfen, ob noch benötigt wird Former user (Deleted) ) | |||||||||
accessTerminationType | defines the type of the access termination | withOnt, withoutOnt | ||||||||
accessTerminationInterface | defines the interface of the access termination | TAE, RJ45, E2000, LC-APC, MMD (Multi Media Dose → Koaxialdose, F-Stecker) ... | ||||||||
reversePowering | defines if the DSLAM needs to be reverse powered | yes, no | ||||||||
leadTime | defines the typical lead time for provisioning an access | |||||||||
accessLineId | defines the identifier of the access line | |||||||||
transportInterconnectionPoint | identifies the point of traffic interconnection | Wert bzw Ort des A10NSP | ||||||||
port | defines the configured port | |||||||||
cvlan | defines the configured C-VLAN | |||||||||
svlan | defines the configured S-VLAN | |||||||||
networkTerminationLocation | describes the location of the network termination | ??? (TBD → bitte entscheiden, ob das Feld dopplet belegt wurde → siehe Ticket ) | ||||||||
dslTechnology | defines the DSL technology, when applicable | ADSL J, VDSL, Vectoring ,G.Fast ??? (TBD → braucht man noch eine dslTechnology, wenn es den accessType gibt, wo auch schon G.fast uund Co angebegben sind) | ||||||||
amountBundledCopperPairs | defines the amount of bundled copper pairs, when applicable | 1, 2, 3 | ||||||||
trafficLimitation | Defines the traffic/Speedlimit of bandwith | yes, no or bandwith value (up and down) → TBD bitte noch festlegen, ob nur ja oder nein oder fest vereinbarte gedrosselte Up & Down BB verwendet wird | ||||||||
IPType | siehe
|