Product Specification
...
Alle Eigenschaften werden optional vom Seller gesetzt, aktuell nicht vom Buyer.
Name | Description | Value Type | AG/LE | Example (werden bei der OAS in der description eingefügt) |
---|---|---|---|---|
accessTechnology | Defines the type of connectivity | string | AG | FTTH, FTTB, FTTC, HFC, Coax, TAL, OAL |
accessProtocol | Defines the type and technology of the access | string | AG | FTTH-Ethernet, FTTH-P2P, FTTH-GPON, FTTH-XGS-PON, FTTB-VDSL, FTTB-GFAST-CuDa., FTTB-GFAST-Coax, FTTB-DOCSIS, FTTB-Ethernet, FTTC-VDSL, FTTC-ADSL, FTTC-SDSL, HFC-DOCSIS |
upstreamNominalBandwidth | Defines the upstream access bandwidth | AG | 100 Mbit/s , 1 Gbit/s, 100 kbit/s | |
downstreamNominalBandwidth | Defines the downstream access bandwidth | AG | 400 Mbit/s , 1 Gbit/s | |
trafficHandover | Defines how the traffic is handed over to the reseller | string | AG | L2, L3, LT |
trafficAggregation | defines the aggregation provided by the supplier hand over close to customer, in a region or one central hand over for the complete country. | string | AG | local, regional, national |
networtTerminationUnitType | defines the type of the access termination | string | LE | withOnt, withoutOnt |
uniConnectorType | defines the interface of the access termination | string | LE | TAE, RJ45, E2000, LC-APC, MMD (Multi Media Dose → Koaxialdose, F-Stecker) ... |
reversePowering | defines if the DSLAM needs to be reverse powered | string | LE | yes, no |
leadTime | defines the typical lead time for provisioning an access | only relevant for PO Qualification not used for Product Ordering | ||
lineID | defines the identifier of the access line (aka lineID) | string | LE | |
enni | identifies the point of traffic interconnection external network to network interconnection | string | LE | Wert bzw Ort des A10NSP |
enniPort | defines the configured port | string | LE | |
cvlan | defines the configured C-VLAN | string | LE | |
svlan | defines the configured S-VLAN | string | LE | |
networkTerminationUnitLocation | describes the location of the network termination | string | AG | Beschreibt die Lage der TAE/GF-TA bzw. ONT (Netzabschluss des NetzCarriers) |
|
|
| ||
trafficLimitationUpstream | Defines the traffic/Speedlimit of bandwith | Quantity: https://bitbucket.org/fit-api/fit-root/src/main/common-api/common-components.yaml?at=refs/heads/main | AG | |||||||||
trafficLimitationDownstream | Defines the traffic/Speedlimit of bandwith | Quantity: https://bitbucket.org/fit-api/fit-root/src/main/common-api/common-components.yaml?at=refs/heads/main | AG | |||||||||
|
| |||||||||||
homeID | string | AG for PO/LE for POQ | ||||||||||