Product Specification
...
Alle Eigenschaften werden optional vom Seller gesetzt, aktuell nicht vom Buyer.
Wie in der Auftragsmeldestruktur beschrieben, werden
- lineId und
- product.name
werden gesetzt, wenn das Product referenzierbar ist.
| Name | Description | Value Type |
|---|
| Example (werden bei der OAS in der description eingefügt) | ||
|---|---|---|
accessTechnology | Defines the type of connectivity | string |
FTTH, FTTB, FTTC, HFC, Coax, TAL, OAL | ||
accessProtocol | Defines the type and technology of the access | string |
| FTTH-Ethernet, FTTH-P2P, FTTH-GPON, FTTH-XGS-PON, FTTB-VDSL, FTTB-GFAST-CuDa., FTTB-GFAST-Coax, FTTB-DOCSIS, FTTB-Ethernet, FTTC-VDSL, FTTC-ADSL, FTTC-SDSL, HFC-DOCSIS | ||
upstreamNominalBandwidth | Defines the upstream access bandwidth |
AG
100 Mbit/s , 1 Gbit/s, 100 kbit/s | ||
downstreamNominalBandwidth | Defines the downstream access bandwidth |
| 400 Mbit/s , 1 Gbit/s | ||
| trafficHandover | Defines how the traffic is handed over to the reseller | string |
| L2, L3, LT | ||
| trafficAggregation | defines the aggregation provided by the supplier hand over close to customer, in a region or one central hand over for the complete country. | string |
AG
local, regional, national | ||
networtTerminationUnitType | defines the type of the access termination | string |
| withOnt, withoutOnt | ||
uniConnectorType | defines the interface of the access termination | string |
| TAE, RJ45, E2000, LC-APC, MMD (Multi Media Dose → Koaxialdose, F-Stecker) ... | ||
| reversePowering | defines if the DSLAM needs to be reverse powered | string |
| yes, no | ||
| leadTime | defines the typical lead time for provisioning an access |
only relevant for PO Qualification
not used for Product Ordering
lineID | defines the identifier of the access line (aka lineID) | string |
enni | identifies the point of traffic interconnection external network to network interconnection | string |
| Wert bzw Ort des A10NSP | ||
enniPort | defines the configured port | string |
| cvlan | defines the configured C-VLAN | string |
| svlan | defines the configured S-VLAN | string |
networkTerminationUnitLocation | describes the location of the network termination | string |
AG
Beschreibt die Lage der TAE/GF-TA bzw. ONT (Netzabschluss des NetzCarriers) | ||
|
| |||
| trafficLimitationUpstream | Defines the traffic/Speedlimit of bandwith | Quantity: https://bitbucket.org/fit-api/fit-root/src/main/common-api/common-components.yaml?at=refs/heads/main |
| trafficLimitationDownstream | Defines the traffic/Speedlimit of bandwith | Quantity: https://bitbucket.org/fit-api/fit-root/src/main/common-api/common-components.yaml?at=refs/heads/main |
|
| ||||||||||
| homeID | HomeId identifies the GF-TA unit at the end user's premise. | string |
The buyer provides the HomeId with the order, if known.
Otherwise, the seller provides the HomeId during the ordering process.